Intermediate & Fine Drawing | MD200 / MD150
Intermediate and Fine Wire Drawing Lines
Our intermediate and fine wire drawing lines reduce pre-drawn copper or aluminium wire to smaller diameters for wire and cable conductor production. MD200 configurations cover intermediate drawing; MD150 configurations cover fine wire drawing.
- Single- or two-wire configurations with a two-motor fast die-change system.
- MD200: horizontal or vertical two-level layouts for intermediate drawing.
- MD150: conical or individual capstan configurations for fine wire drawing.
- Compare each configuration separately for inlet diameter, finished-wire range and annealing data.
Latest product sheet. Confirm the material-specific configuration with your enquiry.
Intermediate and Fine Drawing Specifications
| Technical parameters | MD200 / Horizontal | MD200 / Vertical / two-level | MD150 / Conical capstans | MD150 / Individual capstans |
|---|---|---|---|---|
| Material | Copper / aluminium | Copper / aluminium | Copper / aluminium | Copper / aluminium |
| No. of wires | 1-2 | 1-2 | 1-2 | 1-2 |
| Max. inlet dia. (mm) | 3.00-4.00 | 2.50-4.00 | 1.00-2.00 | 1.00-2.00 |
| Outlet dia. (mm) | 1.00-2.60 | 0.30-1.60 | 0.15-0.60 | 0.15-0.60 |
| Max. speed (m/s) | 30 | 40 | 30 | 30 |
| Drawing passes | 11 / 13 / 17 | 17 / 21 | 17 / 21 | 17 / 21 |
| Annealing current (A) | 2,000-4,000 | 2,000-4,000 | 500-1,000 | 500-1,000 |
| Annealing voltage (V) | 60 | 60 | 60 | 60 |
Swipe horizontally to compare all technical parameters.
Values apply to the specific material and configuration shown. Maximum speed is a reference limit, not a guarantee at every outlet diameter. Confirm the operating range for your wire and production requirements.
Define Your Wire Drawing Requirements
KINGSTRONG coordinates machine sourcing and technical communication with machinery partners in China. Share your material, inlet and outlet diameters, target output, single- or two-wire preference, and required downstream process.
For a suitable proposal, also confirm your preferred drive or layout, take-up requirements, available floor space and utilities.
Common Questions
What is the difference between MD200 and MD150?
MD200 is listed for intermediate drawing, with horizontal or vertical two-level layouts. MD150 is listed for fine drawing, with conical or individual capstans. Both are specified for copper or aluminium wire.
Which outlet diameters are listed?
MD200 horizontal lists 1.00-2.60 mm; MD200 vertical / two-level lists 0.30-1.60 mm. Both MD150 configurations list 0.15-0.60 mm. These are separate model ranges, not one universal specification.
Are single-wire and two-wire configurations available?
Yes. Each of the four columns lists 1-2 wires and the product sheet describes a two-motor fast die-change system. Confirm the required arrangement with your drawing schedule.
How should the annealing data be used?
The sheet lists 2,000-4,000 A for MD200 and 500-1,000 A for MD150, with 60 V in all four columns. Confirm annealing applicability and process settings for your material; these are not universal operating setpoints.