Cable Manufacturing Machines
Multiwire Drawing Machine
This multiwire drawing machine draws copper and tinned-copper wires in parallel for cable conductors, with in-line annealing. Compare the selected MD100 16-wire and 24-wire configurations below.
- Multi-motor drive with precision gearbox transmission.
- Modular electrical control and control-system diagnostics.
- In-line DC resistance annealing with IGBT control and automatic lubrication.
Product sheet opens in a new tab. Confirm the final configuration with your enquiry.
Multiwire Drawing Machine Specifications
| Technical Parameter | 16-Wire Configuration | 24-Wire Configuration |
|---|---|---|
| Machine model | MD100 | MD100 |
| Number of parallel wires | 16 wires | 24 wires |
| Number of drawing passes | 22 passes | 25 passes |
| Inlet wire diameter | 1.80-2.00 mm | 1.80-2.00 mm |
| Finished wire diameter | 0.18-0.50 mm | 0.15-0.40 mm |
| Max. mechanical speed | 32 m/s | 32 m/s |
| Number of drive motors | 2-3 motors | 2-5 motors |
| Annealing voltage | 60 V | 60 V |
Swipe horizontally to compare both configurations.
Selected MD100 configurations are shown; other drawing-pass counts and wire sizes are available. Maximum operating speed depends on wire diameter and annealing requirements. Final specifications are subject to the agreed configuration.
Information for Your Enquiry
Send the details you already have to help define the machine configuration and identify what needs technical confirmation.
Wire material and dimensions
Specify copper or tinned copper, inlet wire diameter and the required finished-wire diameter range.
Parallel-wire configuration
Indicate 16 or 24 wires, required drawing passes and any other configuration requirements.
Output and annealing
Provide the target operating speed or output and the required annealed-wire properties.
Site and support
Share the destination, available space, power supply and installation or existing-machine support needs.
Questions About This Machine
What materials and wire sizes are covered?
The product sheet covers copper and tinned-copper wire drawing. Both selected configurations accept 1.80-2.00 mm inlet wire. The finished-wire range is 0.18-0.50 mm for 16 wires and 0.15-0.40 mm for 24 wires.
Is 32 m/s the operating speed for every product?
No. The sheet lists 32 m/s as the maximum mechanical speed for the selected MD100 configurations. Maximum operating speed depends on wire diameter and annealing requirements. Confirm the required output and configuration with your enquiry.
How can I request a configuration review?
Share the wire material, inlet and finished diameters, parallel-wire count and annealing requirements. KINGSTRONG coordinates machine sourcing and technical communication with partners in China. The final scope and specifications are confirmed in the quotation.